TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 93 of 1205
TM 9-2320-387-24-l LUBRICATION TABLE USAGE FLUID/LUBRICANT CAPACITIES EXPECTED TEMPERATURE ibove +15”F (-9°C) ~40”to -15°F (+4” to -26°C ~40” to 65°F (+4” to -54°C) Engine Oil (MILL-21041 (MILL-461671 Crankcase: w/o filter 7 qt (6.6 L) w/filter 8 qt (7.6 Ll Dry System 10 qt (9.5 L) (inc. oil cooler) X/I-ID0 30* XYHDO lo*** 1EA** Engine Coolant Ethylene Glycol and Water I./4 Ethylene GlycoY 314Water Z/5 Ethylene GlycoY 315Water I/5 Ethylene GlycoV 2f5 Water Radiator: 5 qt (4.7 L) Complete System: 26 qt (24.6 L) t15”F (-9°C) and above t40” to -15°F (+4” to -26°C t40” to -65°F (+4” to -54°C Brake System Fluid Silicone BFS Master Cylinder: 1.12 pt (0.53 L) Complete System: 1.63 pt (0.78 L) Ml Temperatures Transmission Dexrone III 3EA Dry: 13.5 qt (12.8 L) Drain & Refill 7.7 qt (7.3 L) All Temperatures Transfer Case DexronQ III 3.35 qt (3.17 L) All Temperatures All Temperatures All Temperatures All Temperatures Steering System DexronQ III 1 qt (0.95 L) w/ cooler 1.25 qt (1.18 L) 1 pt ea ( 0.47 L) Geared Hub (4) Multipurpose Gear Go 80/90 Axles (2) Multipurpose Gear GO 80190 2 qt ea (1.9 L) Ball Joints, Tie Rod Ends, Pitman Arm, Idler Arm, Propeller ShaRs, etc. GAL4 As Required All Temperatures Hinges, Cables, and Linkages As Required All Temperatures olvHDo *OE/HDO 15/40 (Grade 15W-40) lubricant may be used when expected temperatures are above +5”F (-15°C). **If OEA lubricant is required to meet the temperature ranges listed in the table, then the OEA lubricant is to be used in place of OE/HDO 10 lubricant for all temperature ranges. ***If operating conditions are severe or abnormal, service chassis lubrication points at 1,000 mi. (1,600 km). 2-29