TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 921 of 1205

TM 9-2320-387-24- 1 6-4. REAR PROPELLER SHAFT MAINTENANCE This task covers: a. Removal b. Inspection c. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Manual References TM 9-2320-387-10 TM 9-2320-387-24P MaintenanceLevel Unit [ml 1. Chock wheels and release parking brake (TM 9-2320-387-10X 2. Remove four capscrews (6), two straps (5), and disconnect propeller shaft (3) from differential pinion yoke (4). 3. Slide propeller shaft end yoke (1) out of transfer case extension (2) and remove propeller shaft (3). b. Inspection 1. Inspect propeller shaft (3) for cracks and dents. Replace if cracked or dented. 2. Inspect grease fittings and universal joints for serviceability. Replace universal joints (para. 6-5) or grease fittings if unserviceable. 3. Inspect splined end of end yoke (1) for damage. Replace end yoke (1) if damaged (para. 6-6). I] 1. Slide propeller shaft end yoke (1) on transfer case extension (2) and install propeller shaft (3). 2. Connect propeller shaft (3) to differential pinion yoke (4) with two straps (5) and four capscrews (6). Tighten capscrews (6) to 30-35 lb-R (41-47 N-m). 3. Apply parking brake (TM 9-2320-387-10) and remove wheel chocks. 6-8