TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 894 of 1205
TM 9-2320-387-24-l 5-8. SHIFT CONTROLS HOUSING ASSEMBLY MAINTENANCE This task covers: a. Disassembly b. Assembly INITIAL SETUP: Tools ?&era1 mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P Equipment Condition Shift controIshousing assembly removed (para. 5-7). Maintenance Level unit rY7ziiq 1. Remove pin (4) and knob (3) from transfer case shift tube (2). 2. Remove pin (6) and knob (5) from transmission shift tube (7). 3. Remove neutral start switch leads (9) from openings in boot (8). 4. Remove shift indicator lead (10) from opening in boot (8). 5. Slide boot (8) off sh3t controls housing assembly (11). 6. Remove two transmission selector lens covers (1) from shift controls housing assembly (11). 7. Remove two fiber optic indicator strips (17) from bulbs (16). 8. Remove two bulbs (16) from sockets (15). 9. Remove four screws (141, cover plate (131, and gasket (12) from shift controls housing assembly (11). b. Assembly 1. InstalI gasket (12) and cover plate (13) on shift controls housing assembly (11) with four screws (14). 2. Install two bulbs (16) in sockets (15). 3. Install two fiber optic indicator strips (17) on bulbs (16). 4. InstaU two transmission selector lens covers (1) on shiR controls housing assembly (11). 5. InstalI boot (8) on shift controls housing assembly (ll), placing neutral start switch and shift indicator leads (9) and (10) through openings in boot (8). 6. Complete sliding boot (8) onto shiR controls housing assembly (111, ensuring mounting screw holes align. 7. InstalI knob (5) on transmission shift tube (7) with pin (6). 8. InstaIl knob (3) on transfer case shift tube (2) with pin (4). 5-20