Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 873 of 1205

TM 9-2320-387-24-l 4-80. WIRING HARNESS CONNECTOR REPAIR (Cont’d) c. Female Cable Connector Repair 1. Strip cable insulation (12) from cable (13) to equal depth of terminal well (16). 2. Slide shell (14) and sleeve (15) over cable insulation (12). 3. Insert cable (13) into terminal well (16) and crimp. 4. Slide shell (14) and sleeve (15) over terminal (17). d. Connector Assembly Repair 1. 2. 3. 4. 5. NOTE Refer to TB SIG222 for soldering instructions. Strip cable insulation (18) to depth of solder wells (21) on inserts (22). Slide cable ends (25) through grommet retaining nut (19) and grommet (20). Place cable ends (25) into solder wells (21) and solder. Slide grommet (20) over inserts (22) and press into shell assembly (23) and coupling nut (24) until seated. Screw grommet retaining nut (19) into shell assembly (23) until seated. MALE INSERT OR FEMME INSERT 4-147