Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 869 of 1205

TM 9-2320-387-24-l 4-79. HOOD JUMPER WIRING HARNESS REPLACEMENT (Cont’d) pI7izEq 1. 2. 3. 4. Position left side hood jumper wiring harness (14) in approximate mounting position. Install rubber grommet (15) on hood (7). 5. 6. Connect ground lead 92C (2) to blackout drive light (1). Place coned mounting washer (91, ground lead 19B (31, and blackout drive light (1) through hole in swivel bracket (8). Install blackout drive light (1) on hood (7) with special washer (6), lockwasher (51, and nut (4). Apply antiseize compound to left composite light ground lead 92C (12) and install on buss bar (13) with lockwasher (10) and capscrew (11). 7. Connect harness leads 20E (19),461B (181, and 491B (16) to left composite light terminals (17). CAUTION Use care when installing harness. Failure to do so may cause damage to harness. 4-143