TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 867 of 1205
I TM9-2320-387-24-l 4-79. HOOD JUMPER WIRING HARNESS REPLACEMENT (Cont’d) 2. Remove nut (71, lockwasher W, and special washer (9) from blackout drive light (3) and hood (10). Discard lockwasher (8). 3. Disconnect lead 19B (5) from blackout drive light (3). 4. Remove blackout drive light (31, ground lead 92C (4), and coned mounting washer (6) from swivel bracket (11). 5. Disconnect harness leads 20E (12),461B (211, and 491C (19) from left composite light terminals (20). 6. Remove capscrew (141, lockwasher (13), and left composite light ground 92B (15) from buss bar (16). Discard lockwasher (13). 7. Remove rubber grommet (18) from hood (10). 8. Remove hood jumper wiring harness (17) from hood (10). 4-141