TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 856 of 1205
TM 9-2320-387-24-l -75. BAnERY TRAY MAINTENANCE I This task covers: a. Removal b. Cleaning’and Inspection INITIAL SETUP: c Preventive Modification d. Installation Tools ?&era1 mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Manual References TM 9-6140-200-14 TM 9-2320-387-24P Equipment Condition Batteries removed (para. 4-74). Materials/Parts Four locknuts (Appendix G, Item 109) Sodium bicarbonate (Appendix C, Item 76) MaintenanceLevel Unit a. Removal Remove four locknuts (61, washers (2>,capscrews (11, washers (21, and battery tray (3) from battery box (5). Discard locknuts (6). b. Cleaning and Inspection NOTE For additional information on battery box tray cleaning, refer to TM 9-6140-200-14. 1. Clean battery tray (3) with sodium bicarbonate solution. 2. Inspect battery tray (3) for damage. Replace if damaged. 3. Inspect battery cable protectors (4) and battery compartment seals (7) for damage. Replace if damaged. c Preventive Modification NOTE l The following step will prevent water from accumulating in the battery tray. ,- ; l Refer to hole diagram for location of holes. Locate, mark, and drill four l/2-in. holes in battery tray (3). d. Installation Install battery tray (3) on battery box (5) with four washers (2), capscrews (11, washers (21, ad ~OC~XUS 03. Tighten locknuts (6) to 6 lb-R (8 Nom). 4-130