TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 854 of 1205
TM9-2320-387-24-l 4-74. BATTERY REPLACEMENT AND SERVICING This task covers: a. Removal c. Installation b. Servicing 1 INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-6140-200-14 TM 9-2320-387-24P General Safety Instructions l Wear safety goggles and rubber gloves, and do not smoke when performing battery maintenance. l Remove all jewelry. Maintenance Level Unit EquipmentCondition Battery holddown removed (para. 4-73). WARNING l Battery acid (electrolyte) is extremely harmful. Always wear safety goggles and rubber gloves, and do not smoke when performing battery maintenance. Severe injury will result if acid contacts eyes or skin. l Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or disconnected battery g-round cable contacts battery terminal, a direct short can result, causing instant heating of tools, severe injury to personnel, or damage to equipment. 1-1 Remove two batteries (1) from battery box (2). I] NOTE For battery testing and servicing instructions, refer to TM 9-6140-200-14. c. Installation NOTE Ensure negative terminal posts are correctly located. Cables must reach their respective terminals without stretching. Install two batteries (1) in battery box (21. 4-128