TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 847 of 1205
TM 9-2320-387-24-l 4-71. BUSS BAR REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Seven lockwashers (Appendix G, Item 212) Sealing compound (Appendix C, Item 64) Manual References TM 9-2320-387-24P EquipmentCondition Batteries removed (para. 4-74). Maintenance Level I a. Removal I 1. Remove five nuts (91, lockwashers (81, washers (71, engine harness cable (61, alternator cable (111, battery cable (lo), umbilical power cable (121, and slave receptacle cable (13) from buss bar (2). Discard lockwashers (8). 2. Remove nut (51, lockwasher (41, washer (31, capscrew (141, washer (16), lockwasher (15) and buss bar (2) from power feed-through stud (1) and battery box (17). Discard lo&washers (4) Ad (15). 1 b. Installation 1 1. Install buss bar (2) on battery box (17) and power feed-through stud (1) with lockwasher (15), washer (161, capscrew (141, washer (3), lockwasher (4), and nut (5). 2. Install engine harness cable (61, alternator cable (111, battery cable (101, umbilical power cable (121, and slave receptacle cable (13) on buss bar (2) with five washers (71, lockwashers (81, and nuts (9). 3. Apply sealing compound to buss bar (2), coating all exposed metallic surfaces. - FOLL ,OW-ON TASK: Install batteries (para. 4-74). 4-121