TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 844 of 1205
TM 9-2320-387-24- 1 4-70. 12-VOLT REGULATOR CABLE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools -&era1 mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Four tiedown straps (Appendix G, Item 463) Two lo&washers (Appendix G, Item 205) Lubricating oil (Appendix C, Item 46) Manual References TM 9-2320-387-10 TM 9-2320-387~24P Equipment Condition l Battery ground cables disconnected (para. 4-68). l Hood raised and secured (TM 9-2320-387-10). l Engine access cover removed (para. 10-22). Maintenance Level Unit NOTE Prior to removal, tag leads for installation. 1. 2. 3. 4. 5. 6. 7. Slide back rubber boot (3) and remove nut (11, washer (21, and cable (4) from regulator (5). Remove four tiedown straps (10) from cable (4). Discard tiedown straps (101. Remove nut (71,lockwasher (81, clamp (91, and cable (4) from stud (61. Discard lockwasher (8). Remove nut (16),lockwasher (151, screw (111, washer (12), clamp (131, and cable (4) from bracket (141. Discard lo&washer (15). Remove cap (23) from battery terminal boot (22). Clean lubricating oil from battery terminal boot (22). Remove nut (201, screw (17), cable (4), lead (18), and cable (19) from terminal clamp (21). Remove cable (4) from battery box (24). 4-118