TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 839 of 1205
TM9-2320-387-24-l 4-68. BATTERY CABLE MAINTENANCE (Cont’d) f. Interconnecting Cable Removal 1. Remove caps (10) and (17) from battery terminal boots (‘20). 2. Clean lubricating oil from battery terminal boots (20). 3. Loosen nut (19) and remove terminal clamp (16) from battery post (21). 4. Remove nut (151, cable (141, and screw (18) from terminal clamp (16). 5. Remove battery terminal boot (20) from terminaI clamp (16). 6. Loosen nut (27) and remove terminal clamp (13) from battery post (25). 7. Remove nut (11) and clamp (12) from holddown rod (23). 8. Remove nut (261, screw (81, cable (141, lead (91, and cable (7) from terminal clamp (13). g. Interconnecting Cable Installation 1. 2. 3. 4. 5. 6. 7. 8. Push battery terminal boot (20) onto cable (14) and install cable (14) on terminal clamp (16) with screw (18) and nut (15). Install clamp (12) on holddown rod (23) with nut (11). Apply a l/16-in. (1.6~mm) bead of lubricating oil to battery post pads (22) and (24). Do not allow oil to coat terminal posts (21) and (25). Install battery terminal clamp (16) on battery post (21) and tighten nut (19). Push terminal boot (20) onto cable (7) and install cable (7), lead (9), and cable (14) on battery terminal clamp (13) with screw (8) and nut (26). Install battery terminal clamp (13) on battery post (25) and tighten nut (27). Fill battery terminal boots (20) with lubricating oil. Install caps (10) and (17) on battery terminal boots (20). 4-113