TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 828 of 1205
TM 9-2320-387-24-l 4-6 1. DIRECTIONAL SIGNAL FLASHER REPLACEMENT This task covers: a. Removal b. Installation 1 INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Sealing compound (Appendix C, Item 64) Manual References TM 9-2320-387-10 TM 9-2320-387-24P EquipmentCondition Battery ground cables disconnected (para. 4-68). MaintenanceLevel Unit NOTE The flasher is located under the instrument panel to the left of the steering column. vj 1. Disconnect cannon plug (8) from main light switch (71. 2. Disconnect connector plug (6) from flasher (5). 3. Remove two nuts (41, washers (31, screws (11, and flasher (5) from cowl (2). -1 Install flasher (5) on cowl (2) with two screws (11, washers (31, and nuts (4). Apply sealing compound to threads of connector plug (6) and connect connector plug (6) to flasher FOLLOW-ON TASKS: l Connect battery ground cables (para. 4-68). l Check directional signal flasher for proper operation (TM 9-2320-387-10). 4-102