TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 824 of 1205
TM 9-2320-387-24-l 4-58. MAIN LIGHT SWITCH REPLACEMENT I This task covers: a. Removal b. Installation INITIAL SETUP: Tools Manual References General mechanic’s tool kit: TM 9-2320-387-10 automotive (Appendix B, Item 11 TM 9-2320-387-24P Materials/Parts Lockwasher (Appendix G, Item 2051 EquipmentCondition Battery ground cables disconnected (para. 4-68). Maintenance Level Unit 1 a. Removal 1 1. Disconnect cannon plug (11 from main light switch (81. 2. Remove screw (6), lockwasher (51, single-position lever (41, and washer (7) from lever shaft (9) on switch (8). Discard lo&washer (5). NOTE Lower right lever must be raised to remove screw. 3. Remove four screws (3) from instrument panel (2) and switch (8). 4. Remove switch (8) from behind instrument panel (2). b. Installation 1. 2. 3. NOTE Lower right lever must be raised to install screw. With lever shaft (9) at top of switch (8), install switch (8) on instrument panel (2) with four screws (3). Install washer (71 and single position lever (41 on lever shaft (9) with lockwasher (5) and screw (6). Connect cannon plug (1) to rear of switch (81. FOLLOW-ON TASKS: l Connect battery ground cables (para. 4-681. ‘ Check main light switch for proper operation (TM 9-2320-387-10X 4-98