TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 822 of 1205
TM9-2320-387-24-I 4-57. REAR COMPOSITE LIGHT ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) hlaterials/Parts Four lockwashers (Appendix G, Item 208) EquipmentCondition Battery ground cables disconnected (para. 4-68). Maintenance Level Unit Manual References TM 9-2320-387-10 TM 9-2320-387-24P NOTE Prior to removal, tag leads for installation. II 1. Remove two capscrews (3), lockwashers (41, ground lead 95B (5), and ground strap (6) from housing (17). Discard lockwashers (41. 2. Remove two capscrews (15) and lockwashers (16) and pull shield (1) away from D-beam (14). Discard lockwashers (16). 3. Remove nut (121, screw (2), and clamp (11) from shield (1). 4. Disconnect leads 21(7), 23 (B), 24 (91, and 22-461 (10) from body harness (13). 5. Remove composite light (18) from housing (17). 71 1. Install composite light (18) on housing (17). 2. Connect leads 21(7), 23 (8),24 (91, and 22-461(10) to body harness (13). 3. Install clamp (11) on shield (1) with screw (2) and nut (12). 4. Install shield (1) on D-beam (14) with two lockwashers (16) and capscrews (15). 5. Install ground strap (6) and ground lead 95B (5) on housing (17) with two lo&washers (4) and capscrews (3). 4-96