TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 819 of 1205
TM 9-2320-387-24-l I 4-55. REAR COMPOSITE LIGHT LAMP REPLACEMENT -1 This task covers: a. Removal b. Installation INITIAL SETUP: Tools %&era1 mechanic’s tool kit: automotive (Appendix B, Item 1) hlaterials/Parts Packing (Appendix G, Item 296) Adhesive (Appendix C, Item 12) Manual References TM 9-2320-387-10 TM 9-2320-387-24P EquipmentCondition Battery ground cables disconnected (para. 4-681. Maintenance Level Unit 1 a. Removal 1 1. Loosen six retaining screws (4) and remove composite light door (5) and packing (6) from composite light (1). Discard packing (6). 2. Remove lamps (21, (31, (71, and (8) from composite light (1). 3. Clean adhesive from mating surfaces of light door (5) and composite light (1). b. Installation 1. Install lamps (21, (31, (71, and (8) on composite light (1). NOTE To prevent moisture from entering light assembly, tighten all screws evenly. 2. Install packing (61 and composite light door (5) on composite light (1) and tighten six screws (4). 3. Apply a thin coat of adhesive to seam between composite light (1) and composite light door (5). FOLLOW-ON TASKS: l Connect battery ground cables (para. 4-68). l Check rear composite light for proper operation (TM 9-2320-387-101. 4-93