TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 818 of 1205
TM 9-2320-387-24-l 4-54. FRONT COMPOSITE LIGHT LAMP REPLACEMENT This taskcovers: a. Removal b. Installation INITIAL SETUP: Tools Manual References General mechanic’s tool kit: TM 9-2320-387-10 automotive (Appendix B, Item 11 TM 9-2320-387-24P Materials/Parts EquipmentCondition Packing (Appendix G, Item 295) Battery ground cables disconnected (para. 4-68). Adhesive (Appendix C, Item 121 Maintenance Level Unit -1 1. Loosen five retaining screws (1) and remove light door (2) and packing (4) from light body (5). Discard packing (4). 2. Remove lamps (31, (61, and (7) from light body (5). 3. Clean adhesive from mating surfaces of light door (2) and light body (5). ’ pJIxzzq 1. Install lamps (3), (61, and (7) on light body (5). NOTE To prevent moisture from entering light assembly, tighten all screws evenly. 2. Install packing (4) and light door (2) on light body (5) with five retaining screws (1). 3. Apply thin coat of adhesive to seam between light body (5) and light door (2). o- 1 -- FOLLOW-ON TASKS: l Connect battery ground cables (para. 468). l Check front composite light for proper operation (TM 9-2320-387-10). 4-92