TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 816 of 1205
TM 9-2320-387-24-l 4-53. FRONT COMPOSITE LIGHT ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation INITIAL SFTUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two lockwashers (Appendix G, Item 207) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition l Battery ground cables disconnected (para. 4-68). l Hood raised and secured (TM 9-2320-387-10). MaintenanceLevel Unit NOTE Replacement procedures for right and left front composite light assemblies are basically the same, except left side has four screws securing closeoff cover and right side has three screws. This procedure covers the left front composite light. Prior to removal, tag leads for installation. a. Removal 1. Remove four screws (11, washers (21, and closeoff cover (3) from hood (4). 2. Disconnect leads 20 (5),461(12), and 491(11) from hood wiring harness (6). 3. Remove two capscrews (9), lockwashers (8), ground 92 (7), buss bar (101, and composite light (13) from hood (4). Discard lockwashers (81. [I I. Install composite light (131, buss bar (101, and ground 92 (7) on hood (4) with two lockwashers (8) and capscrews (9). 2. Connect leads 20 (5), 461(12), and 491(11) to hood wiring harness (6). 3. Install closeoff cover (3) on hood (41 with four washers (2) and screws (1). 4-90