TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 814 of 1205
TM 9-2320-387-24-l 4-52. BLACKOUT DRIVE LIGHT LAMP REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Gasket (Appendix G, Item 62) Adhesive (Appendix C, Item 12) Equipment Condition Battery ground cables disconnected (para. 468). Maintenance Level Unit Manual References TM 9-2320-387-10 TM 9-2320-387-24P pl?GGq 1. Loosen three retaining screws (2) on light door (6) and remove light door (6) and gasket (3) from light body (5). Discard gasket (3). 2. Remove lamp (4) from light body (5). 3. Clean adhesive from mating surfaces of light door (6) and light body (5). b. Installation 1. Install lamp (4) on light body (5). 2. Install gasket (31 and light door (6) on light body (51 with lens hood (11 at top. NOTE To prevent moisture from entering light assembly, tighten all screws evenly. 3. Secure light door (6) by tightening three screws (2). 4. Apply thin coat of adhesive to seam between light body (5) and light door (6). 4-88