TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 795 of 1205
TM9-2320-387-24-l 4-42. FAN CUT-OFF SWITCH REPLACEMENT This task covers: a. Removal b. Installation I INITIAL SETUP: TOOIS General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two locknuts (Appendix G, Item 116) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition l Battery ground cables disconnected (para. 4-68). l Hood raised and secured (TM 9-2320-387-10). Maintenance Level Unit NOTE Prior to removal, tag leads for installation. -1 1. Disconnect harness leads 315A/315B (4) from leads 315 (5). 2. Remove two locknuts (11, washers (21, and switch (6) from bracket (3). Discard locknuts (1). [I 1. Install switch (6) on bracket (3) with two washers (2) and locknuts (1). 2. Connect harness leads 315A/315B (4) to leads 315 (5). FOLLOW-ON TASKS: l Connect battery ground cables (para. 4-68). . Lower and secure hood (TM 9-2320-387-10). 4-69