TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 79 of 1205
TM 9-2320-387-24-l Table 2-1. Unit Level Preventive Maintenynce CheFks and Services HMMWV (Cont’d). ITEM INTERVAL iTEM TO 8E PROCEDURES NOT FULLY MISSION NO. INSPECTED CAPABLE IF: 12 Semi- Engine and c. Using 314-h torque adapter c. TYansmission mount annually Transmission (appendix B, item 1341, Mounts loose, cracked, or (Cont’d) tighten two capscrews securing damaged. transmission mount-to-adapter to 65 lb-R (88 N-m). Tighten two locknuts securing transmission mount-to- crossmember to 28 lb-R (38 Nom). CROSSMEMBER 13 Semi- Starter CAUTION annually Disconnect negative cable. a. Inspect starter for mounting security. Tighten mounting bolts to a. Mounting bolt 40 lb-R (54 N*m). missing or will not torque. b. Inspect cables and studs for loose nuts and damage. b. Stud nut loose. 14 Semi- annually Transmission a. Inspect vent lines and connectors for security, cracks, and deterioration. a Vent line cracked, plugged, or missing. b. Inspect transmission shift linkage for bends, excessive play, cracks, and b. Shift linkage is unserviceable. damage that could cause failure. 15 Semi- Transfer annually Case a. Inspect transfer ease vent lines and a Vent line cracked, connectors for security, cracks, and deterioration. plugged, or missing. b. Inspect transfer case shift linkage for bends, excessive play, cracks, and b. Shift linkage is unserviceable. damage that could cause failure. - 2-15