TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 780 of 1205
TM 9-2320-387-24-l _ 4-30. FUEL PRESSURE TRANSDUCER REPLACEMENT I This task covers: a. Removal b. Installation INITIAL SETUP: TOOIS ?&era1 mechanic’s tool kit: automotive (Appendix B, Item 1) Materialflarts Sealing compound (Appendix C, Item 61) Manual References TM 9-2320-387-10 Thl9-2320-387-24P Equipment Condition l Battery ground cables disconnected (para. 468). l Hood raised and secured (TM 9-2320-387-10). Maintenance Level unit NOTE The fuel pressure transducer is a sensor unit for diagnostic testing. It is mounted on top of the fuel filter on firewall of vehicle. 71 1. Disconnect multiple connector (2) from STE/ICE-R wiring harness (3). 2. Remove fuel pressure transducer (1) from fuel filter (4). [b.j 1. Apply sealing compound to threads of fuel pressure transducer (1). 2. Install fuel pressure transducer (1) on fuel filter (4). 3. Connect multiple connector (2) to STE/ICE-R wiring harness (3). FOLLOW-ON TASKS: l Connect battery ground cables (para. 4-68). . Start engine (TM 9-2320-387-10) and check fuel pressure transducer for leaks. . Lower and secure hood (TM 9-2320-387-10). ii 4-54