TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 78 of 1205
TM 9-2320-387-24-l Table 2-1. Unit Level Preventive Maintenance Checks and Services HMMWV (Cont’d). ITEM INTERVAL ITEM TO 8E PROCEDURES NOT FULLY MISSION NO. INSPECTED CAPABLE IF: 11 Semi- Brake annually System e. Inspect parking brake cable, cable e. Parking brake binding, clip, lever, spring, and pushrod/guide or cable frayed or broken. (Cont’d) pin for binding and loose components. Spring or cable clip missing. f. Inspect left and right parking/service brake assembly mounted between rear axle halfshafts and rear differential. Lubricate parking brake lever with grease (Appendix C, Item 32). Parking/ service brake assembly needs no lubrication. 12 g. Inspect rear parking brake cables for damage and/or chaffing in the area of g. Parking brake binding the control arm. If cables are damaged, or cable frayed or broken. replace cables (paras. 7-16 and 7-17). Semi- Engine and a. Inspect engine mounts and insu- annually a. Engine mounts or Transmission lators for cracks, loose, worn, or insulators cracked, Mounts damaged condition. damaged, loose, or worn. b. Check for loose or missing engine mount capscrews and locknuts. If b. Capscrews or locknuts loose or missing. engine mount capscrews or locknuts are loose or missing, notify DS maintenance. (Refer to para. 15-3). LOCKNUT I 2-14