TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 778 of 1205
TM 9-2320-387-24-l 4-29. OIL PRESSURE SENDING UNIT MAINTENANCE Tbis task covers: a Removal b. Inspection c. hstallation INITIAL SETUP: ToOis General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment automotive (Appendix B, Item 2) Materials/Parts Sealing compound (Appendix C, Item 61) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition l Battery ground cables disconnected (para. 4-68). l Engine access cover removed (para. 10-22). Maintenance Level unit a. Removal 1. Disconnect lead 36A (5) from oil pressure sending unit (4). 2. Remove clamp (1) and oil pressure sending unit (4) from bracket (2). 3. Disconnect oil pressure sending unit (4) from connector (3). b. Inspection Inspect connector (3) for damage. Replace if damaged. c Installation 1. Apply sealing compound to threads of oil pressure sending unit (4). 2. Connect oil pressure sending unit (4) to connector (3). 3. Install oil pressure sending unit (4) on bracket (2) with clamp (1). Tighten clamp to 10-20 l&n. (l-2 N-m). 4. Connect lead 36A (5) to oil pressure sending unit (4). 4-52