TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 776 of 1205

TM 9-2320-387-24-l 4-27. HORN MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 11 Maintenance and repair shop equipment: automotive (Appendix B, Item 21 Materials/Parts ‘ISVO lockwashers (Appendix G, Item 205) Manual References TM 9-2320-387-24P Equipment Condition Horn removed (para. 4-26). Maintenance Level Unit a. Removal Remove two nuts (11, lockwashers (51, capscrews (41, and horn mounting bracket (2) from front crossmember (3). Discard lockwashers (5). b. Installation Install horn mounting bracket (2) on front crossmember (3) with two capscrews (4), lockwashers (51, and nuts (1). Tighten nuts (1) to 10 lb-ft (14 N-ml. FOLLOW-ON TASK: Install horn (para. 4-26). 4-50