TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 775 of 1205
TM9-2320-387-24-l I 4-26. HORN REPLACEMENT I This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Two lockwashers (Appendix G, Item 205) Manual References TM 9-2320-387-10 TM 9.2320-387.24P Equipment Condition l Battery ground cables disconnected (para. 4-68). l Hood raised and secured (TM 9-2320-387-10). Maintenance Level Unit NOTE Prior to removal, tag leads for installation. pTizEq 1. Remove two capscrews (41, lockwashers (51, and horn (2) from bracket (3). Discard lockwashers (5). 2. Disconnect leads 25A (1) and 26A (6) from horn (2). -1 1. Connect leads 25A (1) and 26A (6) to horn (21. 2. Install horn (2) on bracket (31 with two lockwashers (5) and capscrews (4). FOLLOW-ON TASKS: l Connect battery ground cables (para. 4-68). l Lower and secure hood (TM 9-2320-387-10). l Check horn for proper operation (TM 9-2320-387-10). 4-49