TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 771 of 1205
TM 9-2320-387-24-l 4-22. HIGH-BEAM LAMP REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Materials/Parts Gasket (Appendix G, Item 56) blanual References TM 9-2320-387-24P Equipment Condition l Electrical gauges removed (para. 4-16). l Speedometer/odometer removed (para. 4-17). Maintenance Level Unit NOTE Prior to removal, tag leads for installation. 1. Remove two light lenses (7) from instrument cluster back panel (4). 2. Remove instrument cluster (6) from instrument cluster back panel (4). 3. Disconnect harness lead 57L (2) and lead 17B (3) from high-beam lamp (5). 4. Remove two screws (11, high-beam lamp (51, and gasket (8) from instrument cluster back panel (4). b. Installation 1. Install gasket (8) and high-beam lamp (5) on instrument cluster back panel (4) with two screws (1). 2. Connect harness lead 57L (2) and lead 17B (3) to high-beam lamp (5). 3. Install instrument cluster (6) on instrument cluster back panel (4). 4. Install two light lenses (7) on instrument cluster back panel (4). FOLLOW-ON TASKS: l Install speedometer/odometer (para. 4-17). l Install electrical gauges (para. 4-16). 4-45