TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 762 of 1205
I TM 9-2320-387-24-l I- 4- 17. SPEEDOMETER/ODOMETER REPLACEMENT ~1 This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Maintenance Level Unit 1. Remove four screws (10) and washers (9) from instrument cluster (4) and instrument panel (8). 2. Pull instrument cluster (4) away from panel (8). 3. Loosen driveshaft nut (2) on speedometer cable (7) and pull cable end out of speedometer (3). 4. Remove two nuts (6) from speedometer retaining bracket (5) and remove speedometer (3) and bracket (5) from instrument cluster (4). -1 1. Install speedometer (3) and retaining bracket (5) on instrument cluster (4) with two nuts (6). Tighten nuts (6) to 8 lb-in. (1 Nom). 2. Install speedometer cable (7) into back of speedometer (31, ensuring core (1) engages in square hole in speedometer (31, and tighten driveshaft nut (2). 3. Install instrument cluster (4) on panel (8) with four washers (9) and screws (10). 4-36