TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 737 of 1205
4-8.2. 400-AMPERE DUAL VOLTAGE ALTERNATOR CABLE REPLACEMENT This task covers: a. Removal b. Installation a. Removal NOTE Prior to removal, tag leads for installation. 1. Remove locknut (7), washer (6), screw (3), clamp (4), and cables (2) and (11) from bracket (5). Discard locknut (7). 2. Remove screw (8), clamp (9), and cables (2) and (11) from bracket (10). 3. Remove three tiedown straps (1) from cables (2) and (11). Discard tiedown straps (1). 4. Remove nut (12), lockwasher (13), washer (14), and cable (11) from stud (22) on battery box side panel (15). Discard lockwasher (13). 5. Remove nut (19), lockwasher (20), washer (18), and cable (2) from stud (17) on buss bar (16). Discard lockwasher (20). 6. Remove grommet (21) from battery box side panel (15) and remove cable (2) through battery box side panel (15). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Locknut (Appendix G, Item 152.2) Eight lockwashers (Appendix G, Item 238) Three tiedown straps (Appendix G, Item 465.1) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition • Hood raised and secured (TM 9-2320-387-10). • Battery ground cables disconnected (para. 4-68). • Engine access cover removed (para. 10-22). 4-18.4 Change 1 TM 9-2320-387-24-1