TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 719 of 1205
4-3. ALTERNATOR/POWER STEERING MOUNTING BRACKET REPLACEMENT This task covers: a. Removal b. Installation a. Removal b. Installation Remove two flanged-head capscrews (3), long flanged-head capscrew (2), and mounting bracket (1) from engine (4). Apply sealing compund to capscrews (2) and (3), and install mounting bracket (1) on engine (4) with two flanged-head capscrews (3) and long flanged-head capscrew (2). Tighten capscrews (3) and (2) to 48 lb-ft (65 N•m). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Sealing compound (Appendix C, Item 60) Manual References TM 9-2320-387-24P Equipment Condition • Alternator removed (para. 4-5). • Tensioner, idler pulleys, and mounting hardware removed (para. 3-82). • Power steering pump removed (para. 8-23). Maintenance Level Unit TM 9-2320-387-24-1 4-4 Change 1