TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 715 of 1205
TM 9-2320-387-24-l r 3-83. FAN DRIVE FRICTION LINING REPLACEMENT I This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P EquipmentCondition General Safety Instructions Prior to loosening screws on fan drive retaining plates, disconnect fan drive hose from fan drive. Maintenance Level Unit Disconnect battery ground cables (para. 4-68). 1 a. Removal ] WARNING Prior to loosening screws on fan drive retaining plates, disconnect fan drive hose from fan drive. Failure to do so may result in injury to personnel or damage to equipment. NOTE It may be necessary to apply compressedair to clutch adapter to disengage fan drive clutch, allowing access to friction lining screws. 1. Remove six screws (1) and three retaining plates (21 from fan drive (3). 2. Remove two friction linings (4) from fan drive (3). 1. Install two friction linings (4) on fan drive (3). 2. Install three retainingplates (2) on fan drive (3) with six screws (1). Tighten screws (1) to 22 l&n. (2.5 Nom). FOLLOW-ON TASK: Connect battery ground cables (para. 4-68). 3-146