TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 696 of 1205

3-73. WATER PUMP INLET HOSE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P Equipment Condition Cooling system drained (para. 3-61). Maintenance Level Unit 1. Loosen two clamps (2) and remove water pump inlet hose (3) from water pump (1) and lower tube assembly (4). 2. Remove two clamps (2) from hose (3). 1. Install two clamps (2) on water pump inlet hose (3). 2. Install hose (3) on lower tube assembly (4) and water pump (1) and tighten two clamps (2) to 90-125 lb-in. (10-14 Nm). b. Installation a. Removal TM 9-2320-387-24-1 Change 1 3-129 FOLLOW-ON TASK: Fill cooling system (para. 3-61). 1 2 3 2 4