TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 691 of 1205
This task covers: a. Removal b. Installation a. Removal INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Material/Parts Sealing compound (Appendix C, Item 60) Personnel Required One mechanic One assistant Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Hood raised and secured (TM 9-2320-387-10). Maintenance Level Unit 3-69. FAN DRIVE HOSE AND QUICK-DISCONNECT REPLACEMENT TM 9-2320-387-24-1 3-124 Change 1 NOTE Apply sealing compound to all pipe threads during installation. 1. Install male end of quick-disconnect (12) on fan drive (3). 2. Install female end of quick-disconnect (2) on fan drive hose (1). 3. Install bulkhead adapter (11) on fan drive hose (1). 4. Install bulkhead adapter bushing (8) on bulkhead adapter (11). 5. Install bulkhead adapter (11) and bulkhead adapter bushing (8) on shroud (4) with washer (7) and nut (6). 6. Install hose (1) and fan drive hose quick-disconnect (2) on fan drive (3). 7. Install elbow (5) on bulkhead adapter bushing (8). 8. Install control valve hose (9) on elbow (5). b. Installation NOTE Have container ready to catch fluid. 1. Remove control valve hose (9) from elbow (5). 2. Remove elbow (5) from bulkhead adapter bushing (8). 3. Remove nut (6), washer (7), and bulkhead adapter bushing (8) with bulkhead adapter (11) from shroud (4). 4. Release fan drive hose quick-disconnect (2) and remove hose (1) from fan drive (3). 5. Remove bulkhead adapter bushing (8) from bulkhead adapter (11). 6. Remove bulkhead adapter (11) from fan drive hose (1). 7. Remove female end of quick-disconnect (2) from fan drive hose (1). 8. Remove male end of quick-disconnect (12) from fan drive (3).