TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 688 of 1205

3-66. SURGE TANK-TO-RADIATOR VENT HOSE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Loosen two clamps (2) and remove vent hose (3) from radiator (4) and surge tank (1). 2. Remove two clamps (2) from vent hose (3). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Manual References TM 9-2320-387-24P Equipment Condition Cooling system depressurized (para. 3-61). Maintenance Level Unit b. Installation 1. Install two clamps (2) on vent hose (3). 2. Install vent hose (3) on surge tank (1) and radiator (4) and tighten two clamps (2) to 10-20 lb-in. (1-2 N m). TM 9-2320-387-24-1 Change 1 3-121 FOLLOW-ON TASK: Tighten coolant filler cap (para. 3-61). 1 2 3 2 4