TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 686 of 1205
3-64. RADIATOR SUPPORTS REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: 1. Remove two locknuts (1), large washers (2), bracket (3) (left side), brackets (4), support brackets (7), and insulators (6) from radiator studs (5). Discard locknuts (1). 2. Remove four locknuts (11), washers (9), capscrews (8), and two support brackets (7) from airlift brackets (10). Discard locknuts (11). 1. Install two support brackets (7) on airlift brackets (10) with four capscrews (8), washers (9), and locknuts (11). Do not tighten locknuts (11). 2. Install two brackets (4), insulators (6), support brackets (7), and bracket (3) (left side) on two radiator studs (5) with large washers (2) and locknuts (1). Tighten locknuts (1) to 20 lb-ft (27 N•m). 3. Tighten four locknuts (11) to 26 lb-ft (35 N•m). b. Installation a. Removal Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Six locknuts (Appendix G, Item 155) Manual References TM 9-2320-387-24P Equipment Condition • Left splash shield removed (para. 10-23). • Right splash shield removed (para. 10-24). Maintenance Level Unit TM 9-2320-387-24-1 Change 1 3-119 FOLLOW-ON TASKS: • Install left splash shield (para. 10-23). • Install right splash shield (para. 10-24).