TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 674 of 1205

TM 9-2320-387-24-l I 3-58. RIGHT REAR HEAT SHIELD REPLACEMENT 1 This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) hlaterials/Parts Lockwasher (Appendix G, Item 208) Manual References TM 9-2320-387-24P Equipment Condition Engine access cover removed (para. 10-22). General Safety Instructions Do not touch hot exhaust system components with bare hands. Maintenance Level Unit WARNING Do not touch hot exhaust system components with bare hands. Severe injury may result. rYX&q 1. Remove capscrew (61, washer (81, and lockwasher (7) from transmission dipstick tube (51, right rear heat shield (41, rear heat shield (11, and wastegate housing (9). Discard lockwasher (7). 2. Remove two capscrews (3) and right rear heat shield (4) from right exhaust manifold heat shield (2). b. Installation 1. Install right rear heat shield (4) on right exhaust manifold heat shield (2) with two capscrews (3). 2. Install right rear heat shield (4) and transmission dipstick tube (5) on rear heat shield (1) and wastegate housing (9) with lockwasher (71,washer (81, and capscrew (6). FOLLOW-ON-TASK: Install engine access cover (para. 10-22). 3-106