TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 670 of 1205
TM 9-2320-387-24-l 3-56. RIGHT EXHAUST MANIFOLD HEAT SHIELD REPLACEMENT This task covers: a. Removal h. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) hIaterials/P& Three lockwashers (Appendix G, Item 206) hlanual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition l Hood raised and secured (TM 9-2320-387-10). l Right rear heat shield removed (para. 3-58). l Starter removed (para. 4-11). General Safety Instructions Do not touch hot exhaust system components with bare hands. hlaintenance Level Unit WARNING Do not touch hot exhaust system components with bare hands. Severe injury may result. a. Removal 1. Remove two capscrews (51, lockwashers (61, and harness clamps (4) from right exhaust manifold heat shield (3). Discard lockwashers (6). 2. Remove four capscrews (7) and right exhaust manifold heat shield (3) from exhaust manifold (2) and cylinder head (1). b. Installation 1. Install right exhaust manifold heat shield (3) on exhaust manifold (2) and cylinder head (1) with four capscrews (7). 2. Install two harness clamps (4) on right exhaust manifold heat shield (3) with two lockwashers (6) and capscrews (5). 3-102