TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 666 of 1205
t TM9-2320-387-24-l 3-53. TAILPIPE HANGER REPLACEMENT I This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) General Safety Instructions Do not touch hot exhaust system components with bare hands. hIaterials/P’arts Six locknuts (Appendix G, Item 157) nlanual References TM 9-2320-387-24P MaintenanceLevel Unit WARNING Do not touch hot exhaust system components with bare hands. Severe injury may result. rFiizz-1 1. Remove four locknuts (51, washers (41, capscrews (91, washers (41, two insulator reinforcement plates (lo), and insulator (8) from tailpipe hanger (6). Discard locknuts (5). 2. Remove two locknuts Cl), washers (21, capscrews (71, washers (21, and tailpipe hanger 6) from frame (3). Discard locknuts (1). b. Installation 1. Install tailpipe hanger (6) on frame (3) with two washers (2), capscrews (71, washers (2% and locknuts (1). Tighten capscrews (7) to 26 lb& (35 Nem). 2. Install insulator (8) and two insulator reinforcement plates (10) on tailpipe hanger (6) with four washers (41, capscrews (91, washers (41, and locknuts (5). 3-98