TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 664 of 1205
TM9-2320-387-24-l 13-51.ANiF0~D-TO-TURBOCHARGEREXHAU~T~IPE REPLACEMENT I Tbii task covers: a. Removal b. Installation INrnAl. SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P EquipmentCondition General Safety Instructions Do not touch hot exhaust system components with bare hands. Maintenance Level unit Rear heat shield removed (para. 3-52). . WARNiNG Do not touch hot exhaust system components with bare hands. Severe injury may result. NOTE The replacement procedure for left and right manifold-to-turbocharger exhaust pipes is basically the same. This procedure covers the 1eRexhaust pipe. rzzGil 1. Loosen clamp (5) and remove exhaust pipe (11 from exhaust manifold (4). Slide clamp (5) onto pipe (1). 2. Loosen clamp (21and remove exhaust pipe (11from turbocharger (3). Slide clamp (21 onto exhaust pipe (1). 3. Remove clamps (21 and (51 from exhaust pipe (11. 1 b. Installation 1 1. 2. 3. Install two clamps (2) and (5) on exhaust pipe (11. Install exhaust pipe (1) on turbocharger (31 and tighten clamp (2). Install exhaust pipe (1) on exhaust manifold (41 and tighten clamp (5). . -- FOLLOW-ON TASK: Install rear heat shield (para. 3-52). 3-96