TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 648 of 1205
TM 9-2320-387-24- 1 3-41. LEFT FUEL INJECTION LINES BRACKET REPLACEMENT Thii task covers: a. Removal b. Installation INITIAL SETUP: Tools %&era1 mechanic’s tool kit: automotive (Appendix B, Item 1) blanual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition l Hood raised and secured (TM 9-2320-387-10). l Engine access cover removed (para. 10-221. hlaintenanceLevel Unit rY-iizq 1. Remove screw-assembled washer (2) and clamp (1) from bracket (5). 2. Remove screw-assembled washer (8) and clamp (9) from bracket (5). 3. Remove two screw-assembled washers (31 and oil dipstick tube (4) from bracket (5). 4. Remove two nuts (6), washers (7), and bracket (5) from valve cover studs (10). b. Installation 1. Install bracket (6) on two valve cover studs (10) with washers (7) and nuts (6). Tighten nuts (6) to 13-20 lb-ft (18-27 Nom). 2. Secure oil dipstick tube (4) to bracket (5) with two screw-assembled washers (3). Tighten screw- assembled washers (3) to 3-4 lb-ft (4-5 N-m). 3. Install clamp (9) on bracket (5) with screw-assembled washer (8). Tighten screw-assembled washer (8) to 3-4 lb-ft (4-5 N-m). 4. Install clamp (1) on bracket (5) with screw-assembled washer (2). Tighten screw-assembled washer (2) to 3-4 lb-ft (4-5 N-m). FOLLOW-ON TASKS: Install Lower engine access cover (para. 10-22). and secure hood (TM 9-2320-387-10). -- 3-80