TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 647 of 1205
TM9-2320-387-24-l 1 3-40. RIGHT FUEL INJECTION LINES BRACKET REPLACEMENT This task covers: a. Removal b. Installation INlTlAl. SETUP: Tools General mechanic’s tool kiti automotive (Appendix B, Item 1) Manual References TM 9-2320-387-24P Equipment Condition l Engine access cover removed (para. 10-22). l Air horn removed (para. 3-14). Maintenance Level Unit [ a. Removal 1 1. Remove two screw-assembled washers (6), clamps (51, and clamp (7) from bracket (1). 2. Inspect two clamps (5) for cracks or breaks. Replace if defective. 3. Remove two nuts (31, washers (21, and bracket (1) from valve cover studs (4). I b. Installation I 1. 2. Install bracket (1) on two valve cover studs (4) with washers (2) and nuts (3). 13-20 lb-R (18-27 N-m). Install two clamps (5) and clamp (7) on bracket (1) with two screw-assembled screw-assembled washers (6) to 3-4 lb-R (4-5 Nom). - Tighten nuts (3) to washers (6). Tighten FOLLOW-ON TASKS: l Install air horn (para. 3-14). l Install engine access cover (para. 10-22). 3-79