TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 631 of 1205

TM9-2320-387-24-l 1 3-32. FUEL TANK HANGERS REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) hlaterials/Parts Equipment Condition Fuel tank removed (para. 3-25). Maintenance Level Unit Adhesive (Appendix C, Item 2) Manual References TM 9-2320-387-24P 1. Remove two nuts (3), washers (4), capscrews (51, and rear hangers (7) from supports (6). 2. %vist two front hangers (9) until tee handles (2) clear slots (11) in support (1) and remove front hangers (9). 3. Inspect four insulators (8) on front and rear hangers (9) and (7). Remove insulators (81,if damaged. 11 1. Install four insulators (8) on front and rear hangers (9) and (71, if removed. 2. Install two front hangers (9) by inserting tee handles (2) up through slots (11) in support (1). Twist hangers (9) so that tee handles (2) are resting across slots (11) and against side of ridge (10). NOTE Apply adhesive to threads of screws before installation. 3. Install two rear hangers (7) on supports (6) with capscrews (51, washers (41, and nuts (3). Tighten nuts (3) to 37 lb-ft (50 N-m). FOLLOW-ON TASK: Install fuel tank (para. 3-25). 3-63