TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 630 of 1205
TM9-2320-387-24-l 3-31. FILLER SPOUT HOSE REPLACEMENT I .-.-- This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition l Fuel tank drained (para. 3-251. l Right rear underbody armor removed (Ml114 only) (para, 11-39). General Safety Instructions Do not perform this procedure near fire, flames, or sparks. Maintenance Level unit WARNING Diesel fuel is highly flammable. Do not perform this procedure near fire, flames, or sparks. Severe injury or death may result. 1 a. Removal 1 1. Loosen clamps (4) and (3) securing hose (1) to fuel tank (51 and filler spout (2). 2. Slide hose (11 onto filler spout (21 until disconnected from fuel tank (5). Remove hose (1) from filler spout (2). b. Installation NOTE Position clamps attaching filler hose to fuel tank as shown. 1. Install hose (1) on filler spout (2) and slide onto filler spout (2) until hose (11 clears fuel tank (5). 2. Connect hose (1) to fuel tank (5) and tighten clamps (3) and (4). FOLLOW-ON TASKS: l Install right rear underbody armor (Ml114 only) (para. 11-39). . Fill fuel tank (TM 9-2320-387-10) and check for leaks. 3-62