TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 604 of 1205
3-20. AIR RESTRICTION GAUGE HOSE REPLACEMENT This task covers: a. Removal b. Installation a. Removal 1. Loosen five clamps (2) securing hose (5) to A-beam (1). 2. Disconnect hose (5) from air cleaner assembly (8). 3. Disconnect hose (5) from gauge (3) located behind instrument panel (4). 4. Remove hose (5) from five clamps (2) and through grommet (6) in cowl (7). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Hood raised and secured (TM 9-2320-387-10). Maintenance Level Unit b. Installation 1. Route hose (5) through grommet (6) and five clamps (2) in cowl (7) and connect hose (5) to air cleaner assembly (8). 2. Connect hose (5) to gauge (3). 3. Tighten five clamps (2) on hose (5) and A-beam (1). TM 9-2320-387-24-1 3-36 Change 1 FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10). 1 3 4 5 6 7 5 8 ~ 2 2 ~