TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 573 of 1205
TM9-2320-387-24-l r 3-4. ENGINE OIL FILTER ADAPTER MAINTENANCE This taskcovers: a. Removal h. Inspection c. Installation INITIAL SETUP: Tools Manual References ?&era1 mechanic’s tool kit: TM 9-2320-387-24P automotive (Appendix B, Item 1) Materials/Parts Gasket (Appendix G, Item 70) Two O-ring seals (Appendix G, Item 280) Adapter seal (Appendix G, Item 2) EquipmentCondition Engine oil filter removed (para. 3-5). Maintenance Level Unit 1 a. Removal 1 1. Remove adapter bolt (61, gasket (51, two O-ring seals (41, engine oil filter adapter (31, and adapter seal (1) from cylinder block (2). Discard adapter seal (11, two O-ring seals (41, and gasket (5). 2. Remove reducer boss (7) from oil filter adapter (3). b. Inspection Inspect reducer boss (7) for damaged threads or cracks. Replace if defective. )I 1. Install reducer boss (7) on oil filter adapter (3) and tighten to 25 lb-ft (34 Nom). 2. Install adapter seal (1) and engine oil filter adapter (3) on cylinder block (2) with two O-ring seals (41, gasket (51, and adapter bolt (6). Tighten adapter bolt (6) to 50 lbfi (68 N-m). -- FOLLOW-ON TASK: Install engine oil filter (para. 3-5). 3-5