TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 572 of 1205
TM 9-2320-387-24-l 1 ENGINE OIL FILLER TUBE MAINTENANCE I This task covers: a. Removal b. Inspection c. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) hIaterials/Parts Lubricating oil (Appendix C, Item 44) hIanua1 References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Hood raised and secured (TM 9-2320-387-102 Rlaintenance Level Unit 1 a. Removal 1 1. Loosen clamp (2) and disconnect CDR valve hose (1) from engine oil filler tube (3). 2. Remove two nuts (41, washers (51, and engine oil filler tube (3) from timing chain cover (7) and studs (8). -1 Inspect grommet (6) for breaks or cracks. Replace if defective. c. Installation 1. Coat grommet (6) with lubricating oil. 2. Install engine oil filler tube (3) on timing chain cover (7) and studs (8) with two washers (5) and nuts (4). Tighten nuts (4) to 13-20 lb-ft (18-27 N=m). 3. Connect CDR valve hose (1) to engine oil filler tube (3) and tighten clamp (2). .- 0 6 FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10). 3-4