Sign up to sell your inventory with NSN Lookup

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 532 of 1205

REFERENCE INFORMATION Make sure the STEXE-R is powered by a W5 cable. If t&e TK mode test tells you that the vehicle has a fault, return to the paragraph you came from. If the vehicle tests OK, continue here. - -I You will have to decide if the DCA test result is wrong. If the TK test gave a substantially different result than the DCA test. answer NO to this question. NOTE VEHICLE DCA FAULTY. Use the STEACE-R in the TK mode for the rest of your testing. See the chart on the foldout page for a way to run the rest of the DCA tests in the TK mode. Have DS maintenance repair the DCA when you’re finished You can check the connections at the shunt and the power stud to see if they are OK. Look at the schematic for help. TM 9-2320-387-24-l DCA TROUBLESHOOTING 2-485