TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 512 of 1205
REFERENCE INFORMATION Lubricate in accordance with TM 9-2320-387-l 0. Check for smooth operation of U-Joints, stripped splines, bent yokes, or other problems. Also check to see if the shaft itself is bent. Repair and replace propeller shafts and U-joints (para. 6-2 through 6-4). Check for tom boots on the CV joints, stripped splines, smooth joint operation, and proper mounting torques. For halfshaft maintenance procedures, refer to para. 6-7. Lubricate in accordance with TM 9-2320-387-l 0. i Make sure the geared hubs turn freely. Check mounting hardware for proper installation. Lubricate in accordance with TM 9-2320-387-l 0. If you haven’t found any faults, check the differential fluid in accordance wfth TM g-2320-387-10. Otherwise, notify OS maintenance (chapter 14). TM 9-2320-387-24-l DRIVETRAIN GEARED HUB TRANSFER CASE OUTPUT YOKE PROPELLER SHAFT 2-463