TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 506 of 1205

REFERENCE INFORMATION TM 9-2320-387-24-l DRIVETRAIN Check for tom boots on the CV joints, stripped splines. smooth joint operation, and proper mounting torques. Replace halfshafts and CV joints (para. 6-7). Lubricate in accordance with TM Q-2320-387-10. A[W I Check for smooth operation of U-joints, stripped splines, bent yokes, or other problems. Also check to see if the shaft itself is bent. Replace propeller shafts or U-joints (paras. 6-2 through 6-5). Lubricate in accordance with TM Q-2320-387-10. CV J&NT BOOT GEAR:D HUB TRANSFER CASE OUTPUT YOKE Make sure the geared hubs turn freely. Check mounting hardware for proper installation. Lubricate in accordance with TM 9-2320-367-l 0. Replace geared hubs (para. 6-Q). PROPELLER SHAFT DlFFERENTtAL INPUT 2-457