Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download

Page 407 of 1205

TM 9-2320-387-24-l REFERENCE INFORMATION The connector is located above the driveshaft toward the rear of the vehicle. Repair wiring (para. 4-80). -I Repair wiring (para. 4-80). RESISTANCE AND CONTINUITY 04,500 OHMS SlWlCE-R TEST 91 I. Connect RED dip and BLACK clip to the in&&d terminals in the question. RED to the first, BLACK to the Second. 2. Start Test 91,0-4,500 Ohms. 3. Displayed reading is in ohms. Less than 5 ohms is continuity. If the resistance is over 4,500 ohms, STEIICE-R displays .9.9.9.9. CONTINUITY (RESISTANCE) MULTIMETER 1. Set the voltmeter to an ohms scale of about 1,000 ohms. 2. Connect the RED and BLACK leads to the connections stated in the question. 3. Be sure to read the correct scale. Less than 5 ohms indicates continuity. For an open circuit, the meter should peg full scale (needle all the way to the left). INSTRUMENTS CIRCUIT REAR OF LEFT CYLINDER HEAD - 2-353