TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 309 of 1205
REFERENCE INFORMATION TM 9-2320-387-24-l STARTER CIRCUIT STARTER AVERAGE CURRENT SlWlCE-R TEST 71 1. Start Test 71, Starter Average Current. 2. Displayed reading is in amps. The starter should draw at least 200 amps with a peak of over 400 amps. I BATTERY CURRENT MULTIMETER 1 1. Bet the voltmeter to a DC volts scale of about 1 I volt. 2. Connect the BLACK lead to the battery side of the current shunt and the RED lead to the other end of the current shunt. 3. Current shunt voltage is proportional to battery current, 100 milliiolts = 1,000 amps. To get current, multiply millivolts x 10. BAlTERY VOLTAGE SIB/ICE-R TEST 67 1. Start Test 67, Battery Voltage. 2. Displayed reading is in volts. Batteries should be 23-25.5 volts. Batteries voltage will drop when glow plugs turn on. BAlTERY VOLTAGE MULTIMETER I 1. Set the voltmeter to a DC volts scale of at least 40 volts. 2. Connect the RED lead to positive and the BLACK lead to negative. 3. Be sure to read the correct scale. 2-253